Home
Products
Applications
Service
Support
Company
Events
Contact
 

 

Conductometers

The new 912 Conductometer for routine use in the lab and on the go or the fully FDA compliant 856 Conductivity Module controlled by either Touch Control or tiamoTM software.

 
2.912.0210912 Conductometer, laboratory version

Conductivity/TDS/salinity and temperature measurement for routine use in the laboratory and on the road.

Conductivity, TDS, or salinity and temperature can be measured and output to a large colour display with the 912 Conductometer. Important information such as charge state, user, IDs can be clearly seen at a glance. A PIN-protected expert mode protects against unintentional changes of different parameters.

The meter is furnished with an accumulator for mobile use that can be charged practically anywhere. It naturally also satisfies the requirements of IP67.

A stand plate allows the mobile meter to be easily converted into a laboratory meter and vice versa.

Very large measured value memory (10,000 data sets) and USB interface (GLP-compliant printout or data export with optional management of the data in tiBase) offer professional data handling.

2.912.0110912 Conductometer with accessories case

Conductivity/TDS/salinity and temperature measurement for routine use in the laboratory and on the road.

Conductivity, TDS, or salinity and temperature can be measured and output to a large colour display with the 912 Conductometer. Important information such as charge state, user, IDs can be clearly seen at a glance. A PIN-protected expert mode protects against unintentional changes of different parameters.

The meter is furnished with an accumulator for mobile use that can be charged practically anywhere. It naturally also satisfies the requirements of IP67.

A stand plate allows the mobile meter to be easily converted into a laboratory meter and vice versa.

Very large measured value memory (10,000 data sets) and USB interface (GLP-compliant printout or data export with optional management of the data in tiBase) offer professional data handling.

2.912.0010912 Conductometer

Conductivity/TDS/salinity and temperature measurement for routine use in the laboratory and on the road.

Conductivity, TDS, or salinity and temperature can be measured and output to a large colour display with the 912 Conductometer. Important information such as charge state, user, IDs can be clearly seen at a glance. A PIN-protected expert mode protects against unintentional changes of different parameters.

The meter is furnished with an accumulator for mobile use that can be charged practically anywhere. It naturally also satisfies the requirements of IP67.

A stand plate allows the mobile meter to be easily converted into a laboratory meter and vice versa.

Very large measured value memory (10,000 data sets) and USB interface (GLP-compliant printout or data export with optional management of the data in tiBase) offer professional data handling.

2.856.2210Conductometric titrator + solvent

Complete package for conductometric titration, e.g., determination of alpha acids in hops products in accordance with EBC 7.4 or of the alkali number in oil products in accordance with IP 400.
With additional second buret for automatic addition of the solvent.

Including 856 Conductivity Module, 801 Magnetic Stirrer, 2 x 800 Dosino, 2 x 807 Dosing Unit (20 and 50 mL), conductivity measuring cell and tiamo™ light.

2.856.1210Conductometric titrator

Complete package for conductometric titration, e.g., determination of alpha acids in hops products in accordance with EBC 7.4 or of the alkali number in oil products in accordance with IP 400.

Including 856 Conductivity Module, 801 Magnetic Stirrer, 800 Dosino, 807 Dosing Unit (20 mL), conductivity measuring cell and tiamo™ light.

2.856.0220856 Conductivity Module with tiamo™ light, including conductivity measuring cell (stainless steel)

High-end conductometer, based on the 856 Conductivity Module, including tiamo™, conductivity measuring cell (stainless steel) and calibration standards. The stainless steel measuring cell is particularly suitable for the measurement of low conductivities.

The Conductivity Module has two USB interfaces for connecting printers, barcode readers or sample changers and four MSB interfaces for stirrers or Dosinos. Integrated in tiamo™ (from 2.0), the 856 Conductivity Module complies with GLP and FDA 21 CFR part 11 requirements.

2.856.0210856 Conductivity Module with tiamo™ light, including 5-ring conductivity measuring cell

Conductivity module for operation with a PC, including tiamo™ light software, 5-ring conductivity measuring cell and calibration standards.

With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells.
Thanks to the galvanically isolated measuring input, pH value and conductivity can be measured in the same beaker without interference.

The Conductivity Module has two USB interfaces for connecting printers, barcode readers or sample changers and four MSB interfaces for stirrers or Dosinos.
Integrated in tiamo™ full (from 2.0), the 856 Conductivity Module complies with GLP and FDA 21 CFR part 11 requirements.

2.856.0120856 Conductivity Module with Touch Control, including conductivity measuring cell (stainless steel)

High-end conductometer, based on the 856 Conductivity Module, including 900 Touch Control, conductivity measuring cell (stainless steel) and calibration standards. The stainless steel measuring cell is particularly suitable for the measurement of low conductivities.

The Conductivity Module has two USB interfaces for connecting printers, barcode readers or sample changers and four MSB interfaces for stirrers or Dosinos. In combination with the 900 Touch Control, the 856 Conductivity Module is in compliance with GLP and FDA 21 CFR part 11 requirements.

2.856.0110856 Conductivity Module with Touch Control, including 5-ring conductivity measuring cell

High-end conductometer, based on the 856 Conductivity Module, including 900 Touch Control, 5-ring conductivity measuring cell and calibration standards.

With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells. Thanks to the galvanically isolated measuring input, pH value and conductivity can be measured in the same beaker without interference.

The Conductivity Module has two USB interfaces for connecting printers, barcode readers or sample changers and four MSB interfaces for stirrers or Dosinos. In combination with the 900 Touch Control, the 856 Conductivity Module is in compliance with GLP and FDA 21 CFR part 11 requirements.

2.856.0010856 Conductivity Module

Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells.
Thanks to the galvanically isolated measuring input, pH value and conductivity can be measured in the same beaker without interference.

The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers or sample changers and four MSB interfaces for stirrers or Dosinos.
Both in conjunction with the 900 Touch Control as stand-alone instrument and also integrated in tiamo™ full (from 2.0), it is in compliance with GLP and FDA 21 CFR part 11 requirements.

 

 
Metrohm Newsletter
Application news, practical tips for the laboratory and more.
E-mail address:
Register! NOW! brief

 

Contact Us

Share this page!