|
Whether used as a standalone instrument, or with a Titrando, the 856 Conductivity Module is the latest add-on to the Metrohm autotitration systems.
It is now possible to measure conductivity with a Metrohm Titrando autotitrator as the 856 can be integrated into a Titrando system. In addition, no longer is it not possible to measure pH and conductivity together. Historically there was interference to potentiometric measurements when measuring conductivity at the same time but with the 856 there is a galvanically separated measuring input so conductivity and pH measurement using a Titrando can now be measured in the same sample beaker. There are three new conductivity cells to measure from 0.01 uS – 2000 mS/cm which have the new five-ring technology that allows a wider range of linearity than classical conductivity cells with Pt sheets and shows no wall effect.
Featuring:
• The 856 Conductivity Module is an extension measuring input for any Titrando installation.
• Four MSB inputs for connection of a stirrer (801, 804 or 803) or dosing units.
• Two USB interfaces for connection of a printer, barcode reader, etc.
• The new five-ring conductivity cells allows a wider range of linearity than classical conductivity cells with Pt sheets and shows no wall effect.
• No interference to potentiometric measurements. Conductivity and pH (e.g. with the 867 pH Module or any Titrando) can now be measured in the same beaker.
• Modes: CAL C, MEAS Cond, Dosing (ADD, PREP, EMPTY)
• Fully FDA compliant standalone conductivity meter when using 840 Touch Control
For more information or to arrange a demonstration, please contact Metrohm UK on Tel 01928 579 600 or contact us by email
|
